Laser Welding Solutions Built Around Your Part
When a part is hard to weld with TIG or MIG, a laser can often do the job with controlled heat and a narrow beam. We start from your part and the problem you see, then build a solution around it.
- Hard-to-weld metals: aluminum, copper, titanium and stainless steel, where high heat reflection or cracking causes trouble.
- Dissimilar metals: copper to aluminum, aluminum to steel and titanium to stainless, joined with controlled heat.
- Battery and precision parts: tabs, cells and thin sections that need small, clean welds.
- Filler and hot wire: wire feeding to fill gaps and improve the seam when the joint needs it.
What the Solution Does for You?
Our laser welding solution is built around your part and the problem you need to solve. It joins the weld types, control and setup you need for a strong, clean and repeatable joint.
- Spot, seam and sealing welds. We handle small spot welds, long seams and leak-tight joints, matched to the part’s use.
- High-reflection metals. A welding head and settings tuned for aluminum and copper control heat and keep the beam stable on reflective metal.
- Filler and hot wire. We add wire to fill gaps, build up the seam or join thicker sections, with heat kept on the joint.
- Fixtures and seam tracking. The part is held firmly and the beam stays on the joint by a robot or fixed setup, so each weld follows one path.
- Sample first. We test your real part before you commit, so you can check the weld and we adjust the process if needed.
What Laser Welding Solutions Have We Provided?
Here are some of the parts and joints we have welded for customers — from stainless pipe fittings and valves to copper tubes, brass parts and wire-fed joints. Each one was tested on a real part before it became a repeatable process.

Filler wire is added as the weld runs, so gaps and joints can be filled with a steady, repeatable bead.

A light, handheld weld head lets an operator join large or hard-to-move parts with a clean, focused beam.

A robotic arm moves the weld head along a set path, so the same joint is welded the same way on each part.

Smooth, sealed joints on stainless pipe fittings, with low heat so the part stays clean and needs little finishing.

Circular welds on valve and flange joints, with controlled heat to keep the round part true and the seal tight.

A branch nozzle is welded around its full circle onto a pipe, forming a leak-tight joint with a narrow heat zone.

Copper tube joints are welded with fast, focused heat, joining the metal with low distortion and a clean bead.

Handheld welding on a brass flange, where the focused beam handles the reflective metal with controlled heat.

A CNC head joins a brass valve to a copper tube along a fixed path, for consistent joints on small parts.
How We Build Your Custom Solution
Share a drawing, a sample part or photos. Tell us the metal and the joint you need to weld.
We check the metal, the joint type and any issue such as cracks, distortion or burn-through.
We choose the weld type, settings, filler wire and shielding gas for your specific part.
We weld a sample on your real part and share the result with you before you commit.
We inspect the seam for strength, sealing and appearance, and share what we find.
We configure the robot or fixed head, fixture and controls to match your part and production.
Installation, operator training and after-sales help keep your welding process running.
Yes. These metals reflect heat, so we use a welding head and parameters tuned for them and run a sample to confirm the joint.
Yes, such as copper to aluminum or aluminum to steel. Controlled heat and the right parameters help join metals that differ.
Controlled heat input helps reduce burn-through and distortion on thin sections. We tune the settings and fixture for your part.
A laser uses a narrow beam with low heat input, so there is often less distortion and less finishing. For heavy joints, TIG or MIG may still fit.
Some joints need no wire. Tight, clean joints can be welded without it; wire feeding helps when there are gaps or a larger seam is needed.
We use a sample weld and check the seam, strength and sealing, then share the result with you before production.
Send your drawing or sample and tell us the problem. We review it and run a test weld; timing depends on the part and we confirm it up front.











