New Generation 3000W Oscillating Welding Head:SW3000S
- Small size, light weight
- 6 trajectory modes
- Integrated drive-control system for high efficiency
- Easy installation, low maintenance
- Super cost-effective
- Product Parameters
- Mechanical Dimensions
- Product List
| Laser Interface | Standard QBH Interface | Swing Frequency | ≤500Hz |
| Laser Wavelength | 1064nm | Swing Accuracy | ≤0.1mm |
| Laser Power | ≤3000W | Repeatability Accuracy | <2μm |
| Focus Lens | F200/F250/F300 | 8-Hour Temperature Drift | <10μm |
| Collimator Lens | F75/F100/F125/F150 | Side Air Curtain | Single Layer |
| Focus Lens Spot Diameter | ≥0.05mm | Welding Mode | Side Blowing Welding/Coaxial Welding |
| Clear Aperture | 20mm | Scan Path Types | 6 types |
| Cooling Method | Water Cooling | Observation CCD | Supported |
| Gas Path | Available | Operating Temperature | +15℃ to +35℃ |
| Illumination | Side Spotlight | Storage Temperature | -10℃ to +60℃ |
| Welding Width | 5mm (Maximum customizable up to 10mm) | Hygrometry | <80% without condensation |
| Name | Quantity |
| Oscillating welding head | 1 |
| Coaxial kit | 1 |
| Wire feed bracket | 1 |
| Air blower (side shaft) | 1 |
| CCD kit | 1 |
| Lighting lamp | 1 |
| 8m power cable | 1 |
| Protective mirror φ25×2mm | 1 |
| Protective mirror φ28×2mm | 2 |
| ±15V 3A Power Supply | 1 |
CCD Coaxial Observation
Featuring an industrial-grade CCD high-resolution camera, this system enables full-process real-time dynamic monitoring of welds, thereby ensuring consistent and reliable welding quality.
6 Track Modes
Featuring an intuitive touch screen interface, this device enables seamless switching among 6 welding modes and real-time trajectory adjustment, delivering enhanced operational efficiency for diverse welding applications.
