CNC Rotary Laser Cladding Machine
- Built for rotationally symmetric external surfaces.
- CNC and rotary motion coordinate the cladding path around the workpiece.
- We review support, fixturing, feedstock, cooling, and post-processing for your part before recommending a configuration.
- Share your drawing and process objective for a technical review.
What is CNC rotary laser cladding machine？
A CNC rotary laser cladding machine is designed for rotationally symmetric external surfaces such as shafts, rolls, rods, and the outer diameters of sleeves. The workpiece rotates in a rotary unit while a CNC axis moves the cladding head along its length. We assess support, fixturing, runout, and post-processing from your drawing before confirming a configuration.
How Does a CNC Rotary Laser Cladding Machine Work?
You load and support the cylindrical workpiece in the rotary unit. The rotary axis turns the part while a CNC linear axis moves the cladding head along the workpiece. Their coordinated movement creates a spiral or other planned path around the outside diameter. Powder or wire is delivered into a laser-created melt pool to form overlapping, metallurgically bonded tracks. The final route depends on support, rotation stability, target layer, and finishing allowance.
CNC Rotary Laser Cladding Machine Applications
These laser cladding applications focus on rotationally symmetric external surfaces. Review shafts, rolls, hydraulic rods, and similar parts by geometry, worn area, support method, and finishing goal.
-
Shaft Journal Repair
Use a CNC rotary laser cladding machine for localized repair of worn bearing or seal journals on a shaft. We review the external target area, support, rotation, and post-processing allowance before confirming the process route.
-
Roll Working Surface Rebuild
Review cladding on a roll’s cylindrical working surface where wear or local damage affects the usable outside diameter. Share the roll drawing and target zone so path coverage and finishing needs can be assessed.
-
Hydraulic Rod OD Restoration
For a hydraulic rod with wear on the exposed outer diameter, review a localized repair or surface build-up route. Rod length, straightness, support, and the final finishing plan must be checked from the drawing.
-
Sleeve and Bush Outer Diameter Repair
Evaluate the outside diameter of a sleeve or bush when a worn seating surface needs controlled build-up. The review considers clamping stability, runout, access, and the required finished size.
-
Drive Shaft Wear Zone Review
Assess a drive or transmission shaft with localized wear on a cylindrical outside diameter, shoulder, or seating area. The rotary path is planned around the target geometry and the part’s support method.
-
Long Slender Rod Cladding Assessment
Long, slender rods need a deflection and support review before cladding. Send the length, diameter, worn zone, and loading method so rotary stability and process access can be evaluated.
It is generally considered for rotationally symmetric external surfaces such as shafts, rolls, hydraulic rods, sleeves, and selected tubes. A configuration review should check the drawing, outer diameter, length, weight, worn zones, and post-processing allowance before the process route is confirmed.
We can review long or slender shafts, but we must assess deflection, support spacing, runout, rotational stability, and the loading method. Please provide the shaft length, diameter, weight, center of gravity, and available supports so we can evaluate the rotary layout.
The rotary unit and workholding are selected based on part dimensions, weight, center of gravity, clamping method, surface access, and required rotation path. A drawing and loading concept are needed before the chuck, supports, and positioner scope can be defined.
Powder or wire may be considered according to the substrate, target layer, process objective, and approved system configuration. Please share the base material, preferred feedstock, repair or protection goal, and any machining allowance for a practical review.
A sample test can be proposed when the project scope and available equipment support it. The sample should represent the part and material, and the test record should define the feedstock, process conditions, inspection method, and acceptance criteria.
Price and lead time depend on the rotary unit, supports, laser source, cladding head, feed system, safety scope, automation, testing, and service requirements. A formal quotation and schedule can be prepared after the part data, configuration, and acceptance scope are reviewed.